Solar Powered LED Area Light
FEATURES AND BENEFITS
• 26″ x 12″ panel.
• Convenient LED light, solar panel, and battery integrated into a single unit.
• Adjustable angle.
• Up to 6,000 lumens, 10, 20 and 30 watt versions available.
• High conversion efficiency mono-crystalline photovoltaic solar panel.
• Long life and high temperature resistance LiFePO4 battery.
• 8 hour charge can power light up to 4 days in intelligent control mode, optional
remote control available for intelligent control reprogramming.
• PIR motion sensor.
• Hybrid dual-powered option available – AC power takes over if battery is low.
DOWNLOADS
SPECIFICATIONS
| Wattage |
10W / 20W / 30W |
| Color Temp |
2700 / 3000 / 4000 (Std) / 5000 Kelvin |
| Housing |
Aluminum Alloy |
| Color |
Silver (Std) / Bronze / Black (powder coated) |
| Lens |
Polycarbonate |
| Lifetime |
101,000 hrs L70 |
| Distribution Pattern |
Type II med (Std) / Type III short / Type V short |
| Working Mode |
Intelligent control |
| Control |
Timer dimming / PIR sensor |
| Ambient Temperature |
0°C (32°F) to 50°C (122°F) recommended, for colder temps – see Application Guide in spec sheet |
| Protection |
IP65 |
| Warranty |
3 Year Limited Warranty |
LUMENS
| Model |
10w |
20w |
30w |
| Lumens |
2,000 |
4,000 |
6,000 |
BATTERY SPECIFICATIONS
| With their high temperature resistance, large current discharge and long life cycle rating, LiFePO4 batteries are preferable for use in solar powered lights. |
| Type |
LiFePO4 (Lithium Iron Phosphate) |
| Run Time |
Up to 4 days (intelligent control) on full charge, Up to 8 hours at 100% brightness |
| Life Cycle |
>2000 cycles |
| Capacity |
6Ah (10W) / 12Ah (20W) / 18Ah (30W) |
| Charge Time |
>3 hrs (10W) / >6 hrs (20W) / >9hrs (30W) |
SOLAR PANEL SPECIFICATIONS
| Mono-crystalline is the preferred type of panel for solar powered lights due to their superior efficiency and lifespan. Features a 21% conversion rate, which is 30% higher compared to traditional solar panels. |
| Type |
High efficiency mono-crystalline |
| Charge Controller |
PWM (Pulse Width Modulation – DC to DC converter that matches charge voltage to battery voltage as it varies due to charge level) |
Solar Powered LED Area Light
FEATURES AND BENEFITS
• Convenient LED light, solar panel, and battery integrated into a single unit.
• Adjustable angle.
• Up to 12,000 lumens, 40, 50 and 60 watt versions available.
• High conversion efficiency mono-crystalline photovoltaic solar panel.
• Long life and high temperature resistance LiFePO4 battery.
• 8 hour charge can power light up to 3 days in intelligent control mode, optional remote control available for intelligent control reprogramming.
• PIR motion sensor.
• Hybrid dual-powered option available – AC power takes over if battery is low.
DOWNLOADS
SPECIFICATIONS
| Wattage |
40w / 50w / 60w |
| Color Temp |
3000 / 4000 (Std) / 5000 Kelvin |
| Housing |
Aluminum Alloy |
| Color |
Silver (Std) / Bronze / Black (powder coated) |
| Lens |
Polycarbonate |
| Lifetime |
101,000 hrs L70 |
| Distribution Pattern |
Type II med (Std) / Type III short / Type V short |
| Working Mode |
Intelligent control |
| Control |
Timer dimming / PIR sensor |
| Ambient Temperature |
0°C (32°F) to 50°C (122°F) recommended, for colder temps – see Application Guide in spec sheet |
| Protection |
IP65 |
| Warranty |
3 Year Limited Warranty |
LUMENS
| Model |
40w |
50w |
60w |
| Lumens |
8,000 |
10,000 |
12,000 |
BATTERY SPECIFICATIONS
| With their high temperature resistance, large current discharge and long life cycle rating, LiFePO4 batteries are preferable for use in solar powered lights. |
| Type |
LiFePO4 (Lithium Iron Phosphate) |
| Run Time |
Up to 3 days (intelligent control) on full charge, Up to 8 hours at 100% brightness |
| Life Cycle |
>2000 cycles |
| Capacity |
24Ah (40w) / 30Ah (50w) / 36Ah (60w) |
| Charge Time |
>6 hrs (40w) / >7 hrs (50w) / >9hrs (60w) |
SOLAR PANEL SPECIFICATIONS
| Mono-crystalline is the preferred type of panel for solar powered lights due to their superior efficiency and lifespan. Features a 21% conversion rate, which is 30% higher compared to traditional solar panels. |
| Type |
High efficiency mono-crystalline |
| Charge Controller |
MPPT (Maximum Power Point Tracking – DC to DC converter that optimizes the match between the battery and solar panel) |
Solar Powered LED Bollard
CERTIFICATIONS / RATINGS
• CE
• IK10
• IP65
KEY FEATURES AND BENEFITS
• Solar powered LED designer bollard with great looks.
• IK10 rated anti-UV vandal-proof cover.
• Optional heated battery for cold environment operation (down to -40°C / -40°F).
• Up to 5 working nights without sunshine (40-50 working hours on full charge).
• 350 lumen max output.
• Selectable color temperature (3000K / 5000K), (3000K / 4000K) or (5000K/Turtle Friendly Amber).
• 11.25” diameter housing for large solar panel to maximum light collection.
• Ultra efficient 180 lumens per watt.
• Four selectable working modes (see p2).
• Automatically reduces output when battery is below 20% capacity to allow for longer operating time on continuous rainy/cloudy days.
• Die-cast housing with marine class coating.
• Direct bury pole option.
DOWNLOADS
SPECIFICATIONS
| Lumens |
350 lm |
| LED Wattage |
1.75 W |
| Beam Angles |
Type II / Type III / Type V |
| Color Temp |
Selectable 3000K/5000K, 3000K/4000K or 3000K/Amber |
| Housing |
Die-cast aluminum with marine grade coating |
| Ambient Temperature |
-20°C (-4°F) to 60°C (140°F) |
| -40°C (-40°F) to 60°C (140°F) w/ battery warmer |
| Lifetime |
>50,000 hrs LM80 |
| Color |
Black |
| Solar Panel |
8W mono-crystalline |
| Battery Type |
7.4V Li-ion |
| Battery Capacity |
10Ah / 74Wh |
| Working Hours |
40-50 hours on full charge |
| Charging Time |
8-10 hours |
| Warranty |
2 Year Limited Warranty |
See specification sheet for product ordering selection, mounting options, weights and dimensions.
